Brake cam suitable for brake anchor plates on the front wheel of your Puch Maxi S & N moped.
This CNC turned part fits all old brake discs where the brake cams and the brake lever are bolted together.
The galvanized brake cam is in no way inferior to the original SGDG / LELEU brake cams in terms of workmanship and functionality.
Width of square: 9 x 9 mm
Width of diagonal: 6 mm
Total length: 38.2 mm
Thread: M6x1 mm
Material: steel
Surface: galvanized
Complete brake anchor plates, brake shoes and the cam for the rear wheel can be found in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Height | 38.2 mm |
| Thread type | M6x1 (standard thread) |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) |
Accessories & related products
GPO Brake support bolt short Inox | Puch Maxi, Supermaxi
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Number of components: 3 pcs · Total length: 32 mm · Ø External head: 14 mm · Drive: Outer edge · Shank: Yes · Ø shaft: 9.8 mm · Width across flats SW: 13 mm · Width across flats SW: 17 mm · Thread type: MF10x1 (fine pitch thread) · Shank length: 9.5 mm · Thread length: 13 mm · Area of application: Standard
EUR 15.00
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Ø outside: 91 mm · Brake lever length (lever length): 55 mm · Total length: 187 mm · Ø screw holder: 6.5 mm · Cranking (offset): 8 mm
EUR 81.40
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Ø outside: 92 mm · Brake lever length (lever length): 68 mm · Total length: 135 mm · Ø screw holder: 6.5 mm · Cranking (offset): 10 mm
EUR 87.20
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Thread type: M5x0.8 (standard thread) · Width: 105 mm · Height: 5.3 mm · Total length: 145 mm · Thread length: 8 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 12.70
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Width across flats SW: 7 mm · Total length: 15 mm · Screw head: Hexagon · Thread length: 7 mm · Area of application: Standard
EUR 2.90
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Place of use: Frame (+ tank) · Material: Polyvinyl chloride (PVC-U_hard) · Color: black · Color: white · Width: 123 mm · Width: 230 mm · Width: 330 mm · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 11.00
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.50
Collection only possible with online purchase and appointment.
