Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Diameter | 10 mm, 12 mm, 15 mm |
| Number of components | 4 pcs |
Accessories & related products
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Number of components: 1 pcs · Diameter: 12 mm · Diameter: 16 mm · Width across flats SW: 17 mm · Total length: 83 mm · Thread type: MF14x1.25 (fine pitch thread)
EUR 11.20
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Number of components: 1 pcs · Diameter: 19 mm · Ø inside: 27 mm · Total length: 290 mm · Ø outside: 93 mm · Height: 80 mm · Area of application: Special tool · Ø Pin: 8 mm
EUR 56.30
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Ø outside: 8 mm · Thread type: M6x1 (standard thread) · Width across flats SW: 7 mm · Thread length: 7 mm · Area of application: Standard
EUR 2.95
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Outlet type: straight · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
EUR 117.40
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 11.60
Cable set E50 engine automatic black | Puch Maxi S / N
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Quantity: 4 pcs · Material: Steel · Color: black · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 6000 mm
EUR 22.90
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø outside: 92 mm · Ø External brake pads: 80 mm · Ø axle: 12 mm · Ø shaft: 10 mm · Ø bore: 12.2 mm · Ø screw holder: 6.5 mm · Wide cam holder: 12 mm · Total length: 135 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm
EUR 88.00
Not in stock
Collection only possible with online purchase and appointment.
