Additional weight made of stainless steel suitable for HPI ignitions from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds with blower.
The weight is mounted underneath the blower wheel in the accessory.
The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lighter flywheel.
Exceptional product for the highest demands of the swiing® quality brand.
Details
| Manufacturer | swiing® ingenious parts |
| Area of application | Performance, Racing, High End, Tuning |
| Material | Chrome steel (known as Nirosta®) |
| Surface | blank |
| Ø inside | 71.8 mm |
| Ø outside | 117 mm |
| Ø mounting hole | 5 mm |
| Thickness | 1.8 mm |
| Weight | 100 g |
| Ø bolt circle | 101 mm |
| Number of fixing points | 4 pcs |
Suitable for the following models
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
EUR 349.20
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Weight: 424 g · Area of application: Tuning
EUR 325.90
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Cone ratio: 1:5 · Ø Flywheel outside: 71.5 mm · Thread type: MF27x1 LH (fine/left-hand thread)
EUR 111.70
HPI stator ignition
Manufacturer: HPI · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Surface: anodized · Tension: 12 V · Ø inside: 27.5 mm · Ø outside: 90 mm · Color: black · Number of cables: 4 pcs · Performance: 60 W · Cable length: 640 mm · Ø bolt circle: 80 mm · Number of fixing points: 6 pcs
EUR 174.50
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g
EUR 69.70
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Weight: 250 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 30.00
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Color: red · Total length: 63 mm · Width: 100 mm · Height: 28 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 355.00
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.20
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard
EUR 3.25
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.50
EUR 25.56/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Internal flywheel: 61.5 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g · Area of application: Tuning
EUR 349.20
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g
EUR 69.70
swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Weight: 250 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 30.00
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 436.50
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g
EUR 72.70
Collection only possible with online purchase and appointment.
