Racing cylinder of the Athena brand for Sachs 504 (with adaptations), 505 & 508 engines, which were installed on Hercules Prima M, 2, 3, 4, 5 and Optima mopeds / mopeds, among others.
Thanks to the large intake, overflow and exhaust, this tuning cylinder provides a considerable increase in performance.
Technical data cylinder:
- Intake port diameter: 19 mm and 24 mm
- Ø inner exhaust flange: 20 mm
- Ø connection exhaust flange: 25.7 mm
- Distance stud bolt exhaust flange: 50 mm
- Ø Thread exhaust flange: M8
- Ø Cylinder neck: 51.6 mm
- Stroke: 44 mm
- Bore: 48.0 mm
- Thread for decompressor: M10 x 1.5 mm
The intake manifold with diaphragm system for Dell'Orto SHA or PHBG carburetor and exhaust flange is included in the scope of delivery.
Notes:
Plugs with long thread must be used.
For Swiss 504 engines (42 mm stroke), the following modifications must be made to the cylinder:
- Adjust the cylinder base and gasket as shown in Figure 6 .
- The cylinder base must be turned off so that the compression is adjusted again due to the shorter stroke, we recommend setting a crushing edge of 0.8 - 1.0 mm.
- On models with an external clutch lever, the intake must be extended, otherwise the carburetor may come into contact with the clutch lever.
As experience has shown that the steel diaphragm plates supplied can break, we recommend replacing them with carbonite diaphragm plates. You can find these and other suitable parts in the accessories section.
Details
| Nominal diameter | 48 mm |
| Manufacturer | Athena |
| Material | Aluminum |
| Surface | sandblasted |
| Area of application | Tuning |
| Crankshaft stroke | 44 mm |
| Ø cylinder neck | 51.8 mm |
| Ø Outlet outside | 26 mm |
| Ø Inlet inside | 14.7 mm, 17.8 mm |
| Inlet window | 31.9 x 36.2 |
| Hole pattern [mm] | 56/60 x 56 |
| Ø outlet inside | 19.4 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Hole spacing outlet | 50 mm |
| Hole spacing inlet | 32.5 mm |
| Outlet type | straight, clamped |
| Number of fixing points | 4 pcs |
| Thread outlet | M8x1.25 (standard thread) |
| Decompressor | M10x1.5 |
| Camouflaged | No |
Suitable for the following models
| Sachs | 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A |
| Hercules | Great - 2, 3, 4, 5, Optima |
Accessories & related products
Athena piston 48 mm #B | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.12 mm · Curvature (D): 1.94 mm · Total piston height (E): 59 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: B · Piston weight: 123 g
EUR 80.70
Athena piston 48 mm #A | Sachs 504 / 505
Manufacturer: Athena · Nominal diameter: 48 mm · Ø outside piston (A): 47.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 30.2 mm · Curvature (D): 1.94 mm · Total piston height (E): 59.05 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 123 g
EUR 80.70
NGK B9ES spark plug long thread
Manufacturer: NGK · Candle designation: B9ES · Area of application: Original · Area of application: Standard · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 21 mm
EUR 7.65
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.60
EUR 25.78/l
Petrol filter large 6 / 8 mm orange
Material: Paper · Material: Plastic · Color: transparent · Color: white · Color: yellow · Ø inside: 4.2 mm · Filter type: Filter paper · demountable: No · Ø outside: 38 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 8 mm · Total length: 49 mm · Total length: 108 mm
EUR 5.75
NGK B7ES spark plug long thread
Manufacturer: NGK · Candle designation: B7ES · Candle thread type: long · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 21 mm · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 7.65
Collection only possible with online purchase and appointment.
